Blackstar HT-5TH User Manual download pdf (Page 6)

of either a single 8 Ohm extension cabinet, the internal loud speakers of the HT-5TH

combo or two 16 Ohm cabinets. The internal loudspeaker of the HT-5TH combo

should not be used together with anextension cabinet. See table below.

‘1x16 Ohm’ output ‘1x8 Ohm or 2x16 Ohm’ outputs

Internal 16 Ohm combo speaker  X X

Internal 16 ohm combo speaker X  

and one 16 ohm extension cabinet

Two 16 Ohm extension cabinets X  X

Single 8 Ohm extension cabinet X  X

WARNING:

The output marked ‘1x16 Ohm’ should never be used at the same time

as either of the outputs marked ‘1x8 Ohm or 2x16 Ohm’.

3. Speaker Emulated Output & Headphones

This output emulates the tonal characteristics of a guitar speaker cabinet and

provides a natural valve overdrive tone for connection to a recording device or mixing

desk, and for use with headphones. To make full use of the stereo reverb, use a

stereo jack to two mono jacks splitter lead to feed two channels of the recording

device or mixer (see diagram below). The output will also function into a mono guitar

type lead. Always use a good quality screened lead.

4. Cabinet Switch

The switch enables you to select either a 4x12 closed back or a 1x12 open back

cabinet emulation for the Speaker Emulated Output.

5. Footswitch

The supplied footswitch is connected here. The footswitch enables you to switch

between the Clean and Overdrive channels. The Overdrive Select Switch (4) on the

amplier must be depressed to allow the footswitch to work.

6. Effects Loop Send

Connect the (mono) input of an external effects unit here.

7. Effects Loop Return

Connect the (mono) output of an external effects unit here.

8. Effects Loop Level

The Effect Loop Level switch sets the effects loop to either +4dBV/-10dBV, which

enables you to use it with either professional equipment (+4dBV setting), or with

guitar level effects such as effects pedals (-10dBV setting).

9. MP3/Line Input

Connect the output of your MP3 or CD player here. Adjust the player’s volume to

match that of your guitar to enable you to play along.

Note: The connection is stereo.

Technical Specication

HT-5TH Combo

Power (RMS):

5 Watts

Valves:

1 x ECC83, 1 x 12BH7

Weight (kg):

12.3

Dimensions (mm):

444 x 237 x 400

Footswitch:

FS-4 supplied

English

Ring

Screen

Tip

Left channel

to mixer

Right channel

to mixer

1 2 3 4 5 6 7 8 9 10 11 ... 24 25

Comments to this Manuals

No comments

Blackstar HT-5TH User Manual Page 6

Comments to this Manuals

Related products and manuals for Accessories for music Blackstar HT-5TH