Blackstar ID:60TVP-H User Manual download pdf (Page 9)

English

• MP3/Line In to Power Amp – when selected, audio received via the MP3/Line

Input will be sent only to the amp’s power amp and speaker.

• USB to Emulated – when selected, audio received via the USB Input will be sent to

the Emulated Output along with your guitar signal. If you are recording via the USB

Output, both MP3 and your guitar will be recorded.

• USB In to Power Amp – when selected, audio received via the USB Input will be

sent to the amp’s power amp and speaker.

By combining these options you can congure your audio in various ways. For

example, you could play an MP3 backing track through the amplier’s speaker,

whilst recording only your processed guitar signal via the Emulated Output.

Alternatively, you could monitor both MP3 and guitar signal via headphones (from

the Emulated Output) but send only your guitar signal through the amplier’s

speaker to be recorded with a microphone.

6. Amp model

This indicates which ID:Series amplier model is connected to Blackstar INSIDER.

7. Amp rmware

This indicates the version of rmware currently within your ID:Series amplier.

8. Save layout on exit

Selecting this setting will save your workspace layout (including all open window

positions and sizes) when you exit Blackstar INSIDER and restore the layout the

next time INSIDER is launched.

9. Show warning messages

With this setting active you will be prompted to conrm any non-reversible actions

e.g. deleting les. Advanced or experienced users may wish to bypass these

warnings by switching this setting off.

10. Auto arrange audio tracks library

Auto arrange will organise your audio tracks library each time a new track is

imported. Blackstar INSIDER will arrange your tracks according to the last sort you

performed, or alphabetically by default. With this setting switched off, each newly

imported track will be placed at the top of the ‘cassette stack’.

2. MIDI channel

This is the channel number on which your ID:Series amplier listens for MIDI

messages. This can be set to a discrete channel (1-16), or ALL CHANNELS (Omni)

which responds to incoming MIDI messages on any channel.

3. Audio mode

This setting congures the audio being sent to your computer audio software via

USB. You can select from a number of different combinations to achieve your

desired recording. This defaults to a speaker emulated stereo output, but also

included is the ability to send a clean guitar signal alongside a fully effected signal;

this is very useful if you wish to ‘re-amp’ your audio track in the future.

Reamping mode switches the audio input source from the guitar input jack to the

USB connection; the USB audio is automatically congured to receive an audio input

from your computer via one channel of the USB connection, and return the fully

effected amplied signal to your audio recording software of choice via the second

USB channel.

Your ID:Series amplier will revert this setting to STEREO EMULATED RECORDING

when it is powered down or if the USB cable is disconnected. This prevents

REAMPING mode being accidentally left on, resulting in you being unable to use

your amplier with a standard guitar input.

4. Mono Effects Loop (ID:60TVP, ID:60TVP-H ID:260TVP and ID:100TVP

only)

Switching on the Effects Loop transforms the Emulated Output and MP3/Line Input

sockets into ‘Preamp Out’ (for sending a signal to your external effects) and ‘Power

Amp In’ (for returning the effected signal to your amp). This means that in addition

to using the studio quality effects within your amp, you can place your own external

effects and stomp boxes ‘in the loop’ for the best sonic performance.

When the Effects Loop is activated, you may still use the USB audio interface as a

line in/out.

This setting is saved when you switch off your amplier.

5. Advanced Audio Routing Options

These options give you exible routing of the audio coming into your ID:Series amp

(either via the MP3/Line input, or the USB input).

• MP3/Line In to Emulated – when selected, audio received via the MP3/Line Input

will be sent to the Emulated Output along with your guitar signal. If you are

recording via the Emulated Output, both MP3 and your guitar will be recorded.

English

1 2 3 4 5 6 7 8 9 10 11

Comments to this Manuals

No comments

Blackstar ID:60TVP-H User Manual Page 9

Comments to this Manuals

Related products and manuals for Audio amplifiers Blackstar ID:60TVP-H